A Replacement Aftermarket Controller for the Meyer Xpress plow. This controller was made to replace the problematic factory 22693. The O.E.M. control is known for burning out and having the buttons pop off. It does not have the shake mode or the automatic raise and lower mode, but has the mount and dismount function. To Enable Mount and Dismount: To enter this mode, you have to double-tap the left button within 60 seconds of turning the control on. The center light on the control will turn blue, letting you know you are in mount and dismount mode and the switch on the front will now work. To exit this mode, you just tap any button and the blue light will go out. This is for Xpress plows only. The early Xpress plows used a wireless control, but because of some issues it was rewired and replaced with this 22693 pistol grip control. This has a 12-pin rectangle plug on the end of the harness with a relay adapter built into it. Control DOES NOT plug directly into your existing harness, Adapter required (Included) -Please make sure the connector matches your connector before ordering -4 way (for Straight Blade Controllers) or 10 way (for Vee & Wing Blades) operation -U-SET feature allows the user to change some of the controls features. -Automatic Shut-off when not in use, approximately 22 minutes -The plow blade will coast to a soft stop (left or right), results in smoother operation and decreased wear on the plows hydraulic system -Express Up/Down Feature (Double Tap) -On/Off switch can be used as an Emergency Stop when required -Illuminated keypad on control for night time plowing -All control functions will time out (shut-off) after a period of time. This helps reduce wear on the pump motor and prevent unnecessary battery drain. Time outs vary depending on which plow the control will be used for. -Flexible Straight Cord -Use for both Left or Right Hand
Western or Fisher Wiring Harness #69817-1.
This wiring harness is in good working condition.
Guaranteed to be in good working condition.
This is the newest version 69817-1. It is a direct replacement for the older 69817.
The truck side light wiring harness for the newer GM trucks with HB3/ H11 or the HIR2 headlights. This is for 3-port only.
This is the light harness only out of a kits 69818-1 and 69818-2.
This part is used on Blizzard, SnowEx, Western and Fisher plows.
This is backed by our 30 day money back guarantee!
Please view ALL photos. If you have any questions pertaining to the product, measurements, additional photos, etc., feel free to email me.
We do our part to save the environment by using recycled and repurposed shipping materials.
For your peace of mind I ship FedEx, UPS or USPS and INSURE all shipments.
If a shipping claim is needed please keep all original packaging and contact us right away.
If you live in Alaska, Puerto Rico, Guam or Hawaii please email me for a shipping quote.
Specifics
- Manufacturer Part Number: 22693, SA22693
- Brand: SAE
- Condition: New
- Item must be returned within: 30 Days
- Return shipping will be paid by: Buyer
- Refund will be given as: Money Back
- Part Type: Snow Plow Controller
- Restocking Fee: No
- Returns Accepted: Returns Accepted