This is a Custom Built controller BOARD for the Western or Fisher classic joystick model,
with the small rectangular 6 pin plug like in picture 5
Check the end of the ad to make sure you buy the model that suits you best.
MADE IN THE USA !!!!
NOW WITH EVEN MORE UPGRADES
Version 3 with Float light and improved PCB board like in my first model,
with Four internal self resetting FUSEs for PROTECTION and gold plated pins on the plug.
What this one now has, is some added float features:
The float will disable itself temporarily when moving left or right - This reduces the power use and strain on the power lines and reduces digging into gravel when angling.
Recently added features:
More enclosed power switch that has a slightly longer handle
Dedicated relay for the motor solenoid - This reduces the power going through the up,left and right switches and through the 2 diodes and this will extend the life of the switches.
It also has an EXTRA switch that enables turning off the automatic float, this lets you lower the plow as needed
this requires cutting a tiny notch in the original case for it.
You can see what is involved with the switch on my video at:youtube.com/watch?v=z2e9g42KxqU
includes a 2 year repair warranty
If you have any function issues, email me !!
Similar board PICTURED
If you Have the old model with the joystick that locks back for float, ask how to modify your case because the metal retainer inside the case needs to be removed and you will need one additional FREE part !
SOME PLUSSES:
My switches are 10 amp (the originals are 5amp) My main on/off switch uses 4 contacts instead of two.. my power wires are stranded copper instead of tin coated copper.. The Traces on my custom made circuit board are wider than the originals which allows them to handle more power.
(this can be seen in the fourth picture which shows a Chinese made original at the top and mine at the bottom)
. the board is coated with green anti arc and anticorrode sealer- . The wires on this one are longer than the originals. it is around 18" IF YOU NEED A LONGER CORD, Make a not in payment.
Includes clear led bulb cover, dust ring and rubber handle
It will ship it by USPS priority mail
If you are not sure if it is your controller and want to check the plow with jumper wires, See the second to last picture. The last picture shows some jumper wire examples.
Model Versions:
Version
#1B: Basic red light with instant float like the factory does and no float bypass switch
Version #2: Yellow power/green float light
instant float like the factory does
with no bybass switch
(This listing)
Version
#3:
Yellow power/green float light with bybass switch
and added relay for motor.
.
Float
secondary
switch in one position gives instant float and in the other position gives no float.
Version
#4:
Yellow power/green float light with bybass switch and added relay for motor. Float secondary switch in one position give no float and in the other position gives tap to drop and hold for 1/2 second for float
Version
#5:
Yellow power/green float light with bybass switch and added relay for motor. Float
secondary
switch in one position gives instant float and in the other position gives tap to drop and hold for 1/2 second for float
Version
#6:
REVERSED up and down positions and Yellow power/green float light with bybass switch and added relay for motor. Float
secondary
switch in one position gives instant float and in the other position gives tap to drop and hold for 1/2 second for float
Version #7: Electronic model that works like the handhelds in respect to soft start and float method (can have the UP and Down reversed)
the ones with bypass switches require a slight DIY modification to the case. These can also be gotten without the bypass switch. Just need to decide which float to use (instant float or tap for partial down and hold for 1/2 second to get float)
MEYER
L
OT
PRO POLY
MOLDBOARD
7.5 Snow Plow
09
404
New but Storage Damage
Cleaning up the Parts dept. New Old Stock. What we have here today is a NEW , Meyer Snow Plow Moldboard. This has been sitting on a rack outside under a tarp for two seasons. There is some weather and sun damage. This is a Meyer
lot
Pro Poly 7.5 that we found in our inventory and don’t need to stock any longer. What you see is what you get.
This plow Moldboard can be shipped but you will be responsible for all shipping arrangements, …..Or come and pick it up we will load.
Replace your rusted steel Plow with a stronger Poly Plow from Meyer.
New from Meyer this sold for $ 1649.95 We just want to get it out of our inventory.
We have been a Meyer Distributor since 1980, many obsolete parts in stock. E-mail us for you needs.
Please look at my photos.
Meyer Part # 09
404
This is a Deal at the Buy It Now Price.
WE DON’T SELL JUNK…CHECK OUR FEEDBACK !!!!!!!!! WE leave that to the other guys…..
There is a fee for shipping due to the size of the box , Please e-mail for a price. OR.. Bring the CASH when you pick it up. CASH IS KING !!!!!!!
PLEASE DO NOT BID ON THIS TO WIN UNLESS YOU CAN PAY FOR IT.
.aucCounter a { text-decoration:none; }.aucCounter span:hover { text-decoration:underline; }.aucHiddenCounter { display:none; }.aucCounterOrangeText { color:#FB6D05; font-family:Arial; Font-size:13px; Font-weight:bold; }.aucCounterBlueText { color:#0068ac; Font-family:Arial; Font-size:11px; }
Track Page Views With
Auctiva's FREE Counter